Carbon Monoxide Alarms and Detectors

Detecting carbon monoxide is the key to keeping you and your family safe. There are many different Carbon Monoxide alarms available, at reasonable prices with varying features, and it can sometimes be confusing to know what you are looking for. We have put together a ‘best practice’ guide to help you make the right choice when selecting your CO alarm.

Certification

Before purchasing a carbon monoxide alarm, you should always ensure it complies with British Standard EN 50291 and carries a British or European approval mark, such as a Kitemark. CO alarms should be installed, checked and serviced in line with the manufacturer’s instructions.

Audible Alarm

It is crucial that you have an audible alarm, rather just than a ‘colour change’ or ‘back spot’ indicator tool, which will sound an alarm when it detects carbon monoxide. This is because you can be most at risk from CO poisoning when you are asleep, because you may not be aware of early CO symptoms until it is too late. Having an audible CO alarm could wake you and save your life.

Power Source

Hard-wired, mains powered carbon monoxide alarms are available, but require professional installation by an electrician to connect them to your home’s wiring. Battery powered alarms are available with either replaceable or sealed for life batteries. The benefit of sealed for life batteries means you can simply fit and forget the carbon monoxide alarm, and trust that it’s powered for its entire product life (usually 7 or 10 years).

Digital CO Display

This important feature detects carbon monoxide concentrations in parts per million on an easily readable screen display, even if the concentrations are below the level that triggers the alarm. The display can give you an early heads up if the CO level is creeping up or is higher than usual. Expect to pay a little extra for this feature.

Wi-Safe 2 Wireless Interlink Technology

Wi-Safe 2 technology provides wireless communication across a broad range of products that display the Wi-Safe 2 logo, intelligently linking them to give a faster response to the dangers of smoke and carbon monoxide. You can link some smoke and CO alarms so that all activate when any alarm is triggered. If CO rises to an unsafe level, the alarms will alert people throughout the house wirelessly. Interconnecting alarms are a vital safety feature in a home with multiple levels.

Low-battery Warning

All battery powered carbon monoxide alarm units warn you when the battery is low. Some provide warning chirps or a visual display so you know when you replace the batteries, or if it is a sealed for life product, to replace the alarm.

Carbon Monoxide Detector Placement

The placement of your carbon monoxide detector is very important. CO alarms should be placed in the same room as fuel-burning appliances (either wall or ceiling mounted), between 1 m and 3 m from the potential source of carbon monoxide. Additional alarms can be located in bedrooms, relatively close to the breathing zone of the occupants. Alarms should be installed by a competent person or a heating engineer.

alarmicon Kitchen | alarmicon Living Room | alarmicon Bedroom | alarmicon Boiler Room

Shouting About Carbon Monoxide Alarms